Distein Forestry-Quarry Marking Spray

Distein Forestry Marking Spray is to be used for marking of marble, wood and stone also. Distein Forestry Marking Spray with it’s reliable adhesion on wet surfaces is weather- and water-proof.

Shop Now

QUALITY AND PROPERTIES

Awarded with the „KWF-Test“ approval mark
Weather-proof, good adhesion on wet surfaces and direct insolation
Ideal opacity and fluorescence
Markings remain strongly visible from 2 to 3 years
Frost-proof till -20° C
Minimal drizzle
The special nozzle is perfect for flat spraying and wood marking
High fertility
Environment-neutral propellant, without CFC
Without Toluene
Without cadmium, lead and other heavy metal
Easy colour-recognition with patented coloured donut
Application is possible with metal spray handle

PHYSICAL AND CHEMICAL DATA

Colours:
Neon-red, Neon-orange, Neon-yellow, Neon-blue, Neon-green, Neon-pink, black, white
Efficiency:
Depending on surface and colour 500 ml are sufficient for approx. 3-4 m²
Drying:
Dust-dry: after 10 minutes
Dry to touch: after 30 minutes
Fully dried: after 24 hours
Disposal:
Only the completely empty can should be put into the recycling skip or appropriate container for reclaimable refuse. Cans which are not empty should be disposed off as “special refuse”.
Storage stability:
10 years if appropriate storage provided (=10°-25°C, relative air humidity of max. 60%)
Container:
Maximum nominal volume = 500 ml

ENVIRONMENT AND LABELLING

Environmentally compatible: European Aerosols is committed to apply formulations without restricted or critical ingredients and to achieve best possible performance. The caps and packagings are made of recyclable material.

Disposal: Please mind the residue inside the containers. Completely emptied containers can be used for recycling. If cans are not emptied, they should be disposed off as “special refuse”.
Only for DE: In order to ensure a high reuse and recycling rate, the legislator requires, in accordance with §15 – VerpackG, Paragraph 1, the return of transport, sales or outer packaging, alternatively, however, deviating agreements can also be made.

Labelling: All products of European Aerosols comply with the current status of their labelling regulations. Classification and distinction takes place by the presently legal form of the Globally Harmonized System of Classification and Labelling of Chemicals (GHS) or rather by CLP 1272/2008/EG regulations. Our safety data sheets comply with the current form of REACH 1907/2006/EG, article 31 und appendix II,

USING INSTRUCTIONS
Before use, carefully read and observe the warning texts on the label!

Before use, shake can well for 2 minutes.
Spray to test colour and compatibility on an inconspicious area.
Distance approx 10-15 cm

Distein Forestry-Quarry Marking Spray

EXAMPLES FOR USE